What's New as of March 4th, 2000

Changes For This Release

The following changes were made to scu for this release:

NOTE: This work is provided by the Data Products Group, managed by Charlie Newfell. These changes are not currently part of the Tru64 release.

Within Compaq, the updated scu kits are located @ URL:

http://www.zk3.dec.com/~rmiller/scu.html


Mail Send mail to admin of this page: [email protected] Home To Robin's home page.

Last modified: March 4th, 2000


Examples:


tru64% scu show version
    --> Date: March 4th, 2000, Version: V4.0x, Author: Robin T. Miller <--
tru64% 

tru64% scu scu> sbtl 1 0 0 Device: TL800, Bus: 1, Target: 0, Lun: 0, Type: Medium Changer scu> show elements status empty Element Transport Exception Element Volume Address Status State Type Tags ------- --------- --------- ------- ------ Transport 0: 0 Empty Normal MT Slot 8: 9 Empty Normal ST Drive 0: 240 Empty Normal DT (Serial Number) CX742S3311 Drive 1: 241 Empty Normal DT (Serial Number) JF71503116 scu> show elements status full Element Transport Exception Element Volume Address Status State Type Tags ------- --------- --------- ------- ------ Slot 0: 1 Full Normal ST BPZ755 Slot 1: 2 Full Normal ST BPZ754 Slot 2: 3 Full Normal ST BPZ750 Slot 3: 4 Full Normal ST CLN900 Slot 4: 5 Full Normal ST BPZ751 Slot 5: 6 Full Normal ST BPZ756 Slot 6: 7 Full Normal ST BPZ752 Slot 7: 8 Full Normal ST CLN901 Slot 9: 10 Full Normal ST BPZ753 scu> show element address 241 Element Transport Exception Element Volume Address Status State Type Tags ------- --------- --------- ------- ------ Drive 1: 241 Empty Normal DT (Serial Number) JF71503116 scu> scu> exit tru64%
tru64% scu scu> sbtl 1 0 0 Device: TL800, Bus: 1, Target: 0, Lun: 0, Type: Medium Changer scu> set sense full scu> set width 80 scu> show element tag Robin Device/Command Information: Device Name/Type: TL800 (Medium Changer) Nexus Information: Bus 1, Target 0, Lun 0 Erroring Command: send volume tag Command Descriptor Block: b6 00 00 00 00 04 00 00 00 28 00 00 Requested Transfer Length: 40 Actual Transfer Length: 0 Data Bytes Sent: 52 6f 62 69 6e 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 00 00 00 00 00 00 00 00 Command Timeout: 300 seconds Request Sense Information: Error Code: 0x70 (Current Error) Valid Bit: 0 Segment Number: 0 Sense Key: 0x5 (ILLEGAL REQUEST - Illegal request or CDB parameter) Illegal Length: 0 End Of Media: 0 File Mark: 0 Information Field: 0 Additional Sense Length: 20 Command Specific Information: 0 Additional Sense Code/Qualifier: (0x24, 0) = Invalid field in CDB Field Replaceable Unit Code: 0 Bit Pointer to Field in Error: 0x4 (valid, bit 5) Error Field Command/Data (C/D): 0x1 (Illegal parameter in CDB bytes) Byte Pointer to Field in Error: 0x5 (byte 6) Additional Sense Bytes: 00 00 00 00 00 00 00 00 00 00 scu>
tru64% scu sbtl 1 0 0 set sense full tur scu: 'test unit ready' failed on device 'TL800' at nexus [1/0/0] scu: [1/0/0] CAM CCB function 'XPT_SCSI_IO' failed, CAM status = CAM_CMD_TIMEOUT (0xb) - Command timed out The command timeout was set to 180 seconds tru64%
tru64% scu scu> sbtl 1 0 0 Device: TL800, Bus: 1, Target: 0, Lun: 0, Type: Medium Changer scu> sw /dev/rmt0h Switching to device entry /dev/rmt0h (TZ89)... scu> pwd Device: TZ89, Bus: 1, Target: 5, Lun: 0, Type: Sequential Access scu> sw Switching to device entry [1/0/0] (TL800)... scu> pwd Device: TL800, Bus: 1, Target: 0, Lun: 0, Type: Medium Changer scu>